MFP 3 technical data
| Feature | MFP 3 |
|---|---|
| Outer dimensions | 383 × 281.3 × 18 mm |
| Pocket dimensions | 37.9 × 35.6 × 9.5 mm |
| Parts per pallet | 54 |
| Grid | 9 × 6 pockets |
| Article number Classic (grey) | 80997155 |
| Article number Standard/pearl white (white) | 81559700 |
Dimensions and capacity as per the MANZ data sheet 08/2020. The binding dimensioned drawing for your chosen version comes with our quotation.
For larger components that need guidance
In the 9 × 6 grid, larger components lie individually and at a distance from each other. The deeper pockets also guide parts that would tip over or slide in a flatter pallet.
It is suitable, for example, for larger turned and milled parts, flanges, bearing rings, gears and assembly parts with a footprint of up to 37.9 × 35.6 mm. The finer subdivision of the pocket floor supports the parts without large-area contact.
Mind the height and stacking clearance
With the MFP 3, it is worth checking the overall height of the loaded part. If it protrudes above the pallet, it needs additional clearance when stacking or in a magazine. For even larger or taller parts, there is the MFP 4 with a height of 26 mm and a pocket depth of 17.5 mm. Smaller parts can be packed more densely in the MFP 2 with 96 places.
What the MANZ MFP 3 offers: features of the MFP system
As a workpiece carrier, the MFP 3 accompanies your parts through storage, transport, cleaning and machining. All models in the range share the same system features:
- Uniform footprint: All five models measure 383 × 281.3 mm and can be used in the same rack, magazine or stacking system.
- Anti-rotation feature: A notch on the side clearly defines the orientation of the pallet – important for automation and image processing.
- Minimised contact area: The parts rest on an open grid structure and are touched at only a few points.
- Cleaning in the pallet: Parts can be cleaned directly in the pallet in an ultrasonic bath; temperature resistance is designed for washing and drying up to 89 °C.
- Dimensionally stable and chemical-resistant: High dimensional stability and very good chemical resistance for repeated use.
- Stackable: Standardised stacking systems; stackable with the MANZ pin pallet.
- Identification: Barcode label with serial number; can be retrofitted with an RFID chip for traceability in medical technology.
- Two colours: Classic in grey and Standard/pearl white in white – each with its own article number.
Reordering the MFP 3
Already using the MFP 3? Send us the article number from your delivery note – 80997155 for Classic in grey or 81559700 for Standard/pearl white in white – together with quantity and requested delivery date. If you only have the designation “MANZ MFP” without an article number, a photo of the pallet showing the embossed model number is enough. We identify the matching version and send you a quotation with price and delivery time.
Questions about the MFP 3
How many parts fit on an MFP 3?
The MFP 3 has 54 pockets in a 9 × 6 grid – 54 parts per pallet with one part per pocket.
How tall is the MFP 3?
The MFP 3 is 18 mm high and its pockets are 9.5 mm deep. Models MFP 0 to MFP 2 are 14 mm high.
What is the difference between Classic and Standard/pearl white?
The colour: the MFP 3 Classic is grey, the MFP 3 Standard/pearl white is white. Each has its own article number. The colour helps, for example, to keep pallets for different processes or customers apart – and dark parts such as carbide stand out with high contrast on the white pallet. If you already use one version, it is best to reorder the same one so that your pallet pool stays uniform.
Enquire about the MFP 3 · Compare all models · Prepare a sample test · Model comparison